My parents had an extension built a few years ago and the builder fitted a plastic roof tile vent which is connected by flexi pipe to the bathroom...
For the plumbers which boiler series would you say is better? Victor
Hi, When soldering after putting a thin layer of flux on pipe and then pushing into fitting with a twist do you guys wipe the excess flux off...
Hi all, My parents are having there magnetic filter replaced which was a boilermag which is 3 years old , when fitted I believe the plumber used...
Am having trouble with the basin waste, have now got it to seal 4 times with plumbers mait, used a rigid clear washer under the large backing and...
I am changing the flexi's on my bath for copper (family member had theirs fail under bath) and have now redone pipework and ready to connect up to...
Our Low Voltage extractor fan has failed and I have an inline one to replace it which is more powerful. Is it alright for me to do the wiring...
Bought some end feed 15mmx3/4 tap connectors with fibre washers from either screwfix or toolstation, can't remember now as bought 2 months ago....
My parents have a boilermag magnetic filter fitted below their ideal logic boiler. I tried cleaning the filter today, closed the isolating...
Hi All, I recently refurbished our bathroom, the skirting board and door were lightly rubbed down, I then applied some old oil based undercoat...
I am fitting a new radiator and central heating magnetic filter fernox omega tf1 and was going to do a mains water flush of the system. My...
I am installing small square glass mosaic tile sheets. I have stuck the plastic backer sheet on them but was still having difficulties...
I was thinking of fitting a low extended mcalpine trap sm10e which has a 60mm seal to my bath, my question is are these traps only meant to be...
Hi, I am fitting an ideal standard Tesi bath which has the ideal form plus coating making it stronger and warmer. The bath has a wooden batten...
Hi, Just refitted an old kitchen tap by paini model trixi. One of the flexi pipes was faulty so bought some new ones from screwfix which have a...
During last week loft has had a lot of condensation on rafters and felt. Loft has added extra insulation. Also been running new dehumidifier in...
In the last month sometimes when turning off the hot tap on the bath or the thermostatic shower we get this water hammer noise. Sometimes the...
Fitting new 18mm upvc fascia, if the rafter feet are ok can I nail my two 65mm polytop nails straight into these or should I fit noggins to all...
Am going to fit new 18mm uPVC fascia and have bought 65mm long pol nails 3mm diameter. Do I need to put a pilot hole on uPVC fascia and rafter...
I have a grp valley fitted and I'm getting water behind facia board at bottom valley. The things I can see that are wrong are valley kicks up at...
Separate names with a comma.
Visiting from the US? Why not try DIYnot.US instead? Click here to continue to DIYnot.US.Dismiss Notice