Hi all I wondered if someone could give me a rough idea of the price to have a new room plastered-I will be drylining all the walls and ceiling...
I am sure it would be more than adequate most of the time. However it is not what I have paid for, I ordered a 32mm supply and have been given a...
But to use the fuse analogy, surely this is the equivalent of having a 60 amp cable and running it on a 30amp fuse, the fuse will be the...
thought it might be worth adding - I have a 32mm stopcock and 28mm copper pipe running to feed various rooms/outlets, all brand new so I do have...
Hi all, I laid a new water main last year and paid the significant cost to have it hooked up by southern water. Since having it done as I have...
Thanks, I figured it couldn't do any harm as if the first PRV was supplying say 3.5 bar to the cylinder it just means the 2nd PRV won't have any...
Hi all, I am having a new boiler and pre-plumbed unvented cylinder installed soon. The boiler is going to be located around 4M from the stopcock...
Thanks for this, so if I were to attach my new 32mm to the 20mm at the edge of my property I may find this improves the flow? I might give this a...
Thanks, I am in a 4-bed detached and we are adding a bedroom, so sounds like the right size!
I have no way of knowing what percentage of 20mm is under the road surely? I have already trenched and run a 32mm pipe to the edge of the road...
yes, definitely 20mm blue mdpe incoming
Hi all, I have ben quoted £2k by southern water to upgrade my water main from 20mm MDPE to 32mm. This is due to them needing 4-way lights in the...
Thanks Bernard, I was referring to the Pressure regulation valve on the unvented cylinder which regulates the incoming pressure and also has a...
Hi all, I am looking at having an unvented system installed and in chatting to the installer they mentioned a lot of pre-plumbed unvented...
the driveway is currently a bit lower than the road so should contain the stone quite well. I can go about 120mm higher to match the level of the...
thank you, so if I break it up would I need to add MOT type 1 or planings or anything or just stones on top? I have been looking at things like...
for some reason diynot will not let me add photos at the moment! If I break the drive up a bit then put planning over it would that work as a base...
It’s got some cracking and lumps, £20/m isn’t bad compared to other expensive options but a lot more than gravel on top of plannings. Can anyone...
I have a stopcock in the house, but plan on relocating the main. So I believe I can isolate supply at the meter upstream and then work on this...
haha I thought the same, not sure lead is worth enough for me to dig a 2ft trench to get it!!!
Separate names with a comma.
Visiting from the US? Why not try DIYnot.US instead? Click here to continue to DIYnot.US.Dismiss Notice