Thanks so much for your patience with me. That has fired straight up!!! A happy home.
amazing!!! I can't believe I missed that. What a fool! I'll give this a go and report back, though I am sure this will do the trick now.
There is nothing much to it as it just plugs in via a Molex and uses the OpenTherm wiring in my boiler. (I wish Hive was OT this would have been...
Yes - without the receiver connected nothing works.
Hi - I wondered if you had had a chance to look at the pictures yet? I'm sure I've tried just about every permutation but cant work this out :(...
Picture 1 shows my current wiring, which is working as long as the Ideal wireless receiver remains connected. Picture 2 shows the Ideal wireless...
Fair enough - I will do this in the morning now when there is a bit more light. I haven't implemented what I have drawn yet but will do so and...
So, based on what you have said, this is how I should be wiring the receiver. I'm confused why connection 1 in the receiver would not be used at...
I tried this, so removed the wire from 1 and put it in the live connection in the receiver. I removed the boilers own wireless receiver and...
Just to confirm, that would be putting the wire that is currently in 1 to the live port?
Possibly? And this would be done inside the receiver? Which port would I bridge with live?
So I have now got this working - but as suggested with the old receiver connected and the thermostat plugged in. I have had to put the old...
Its this https://www.manualslib.com/manual/1401236/Ideal-Touch-Connect.html?page=1#manual
The problem is, the actual programmer part is built into the thermostat, so I can't just turn it on as the thermostat needs power, and therefore...
also just attached the relevant pages from the installation book of the boiler...in case that helps.
Thanks. The first picture shows the cables I have connected to the receiver. Second shows the Molex connector that went into the wireless programmer.
Hi understood. So where exactly do I do this? Should I put the wire bridge back in at the boiler end, like in this photo? Or, do I bridge them on...
Hello DIYers I made a similar post a few days ago that didn't get any helpful information back. I though I would update where I have got to,...
Hi I am just after some quick advice. I am removing a Nest thermostat and replacing it with a Hive one. The Nest is using OpenTherm which I know...
Separate names with a comma.
Visiting from the US? Why not try DIYnot.US instead? Click here to continue to DIYnot.US.Dismiss Notice