Hi folks, Ive just fitted new bath taps. Since fitting them ive noticed that for the first second after turning them on the water comes out...
Hi folks, Does anyone know where i can get a round glass basin mounting ring? Ive seen loads on google but they are in the usa. Im stumped and...
Cheers for the replies chaps. I dont know why the previous fella didnt tile straight onto this. The whole stud partition wall is double...
Hi folks, Ive just ripped the bathroom out and one of the walls im going to tile is old sand/cement render. Can i tile straight onto this or do...
Afternoon folks, Im in the middle of ripping the bathroom out. One wall is plasterboard. it was tiled so i ripped the plaster board down only...
Cancel the above, I found the wire from the switch and it works, Cheers, TMD
Folks, I have just put a new light in the bathroom but didnt mark what wires went where :oops: ( Its been a long day ) There are 2 wires. 1...
Folks, ive just had my ceilings plastered. When they dry i intend to paint them. Do i need to do anything before i paint them? IE brush it all...
JohnD The bulb has been changed and all the lights work. Thanks for spending the time to help me out. TMD
Aha!!!!! It works....only 1 light hasnt come on. I will check the wires and bulb So from todays lesson i have learnt that the black wire is...
Sorry forgot to mention.....i am putting the wires into terminal block then running the wire from that to the light........is it still going to...
Yep it buzzes with the switch on but not when its off
with the switch off nothing bleeps when doing black 1 to all the reds. Same with black 2 and 3
Tried it a few times.....still the same Black 1 to red 1- Meter buzzes Black 1 to red 2-Nothing Black 1 to red 3-Nothing Black 2 to all...
Black 1 to red 1- Meter buzzes Black 1 to red 2-Nothing Black 1 to red 3-Nothing Black 2 to all the reds- Nothing Black 3 to all the reds-...
right i have labeled the cables..... now am i right in saying i need to hold a probe on to black 1 and test that against red 1, then red 2 and 3....
I have a multimeter...
I have managed to fit them in the front room now. Cheers for the advice TMD
The light that was originaly there was just a terminal block fitting with all the blacks in one hole, all the red in one hole and the earths in...
In fact there are 3 wires....3 red,3 black,3 earth
Separate names with a comma.
Visiting from the US? Why not try DIYnot.US instead? Click here to continue to DIYnot.US.Dismiss Notice