Ive just put up a load of tongue and groove style thin wood paneling in a bathroom, that im going to be painting a thick light grey, the grain...
I had an old 60's Gas fireplace removed from my living room this week and im pretty sure whats left is an asbestos board and possible asbestos...
I have bought a new tap for the kitchen sink, the tails on it are standard tap size on the tap end, on the other end the tightening nut is smaller...
Ive just installed a brand new oak worktop. unfortunately the edges of the joins are a millimeter or two out due to the tops being ever so...
just finished decorating a room, had it all planned in my head and when ive come to fit everything in the way i planned it doesn't fit, the bed is...
I have a double socket in the bedroom, it's on a ring with two wires feeding into it, no spurs etc on this circuit it's all new. The wires run...
My house has 1950's tongue and groove floorboards, they dont appear to be much use, they are loose, noisy some are split and warped (nailed down)....
had a washing machine repair guy around who told me i needed to replace some parts to do with the dryer portion of my washer dryer, this is...
Had the ceiling skimmed in the bathroom a few weeks ago and we painted it about a week ago. did a base of watered down paint and then a few days...
Ive been searching and getting so much conflicting advice that ive decided to post and hopefully get some straight answers. I want to tile my...
I have a bathroom with, accent lighting (leds) and a main light that triggers the bathroom fan which stays on after the light is used. the accent...
doing my bathroom renovation and had the floor up in the corridor, got lazy and had a load of junk out there, on the joists, so was having to step...
After some advice on here, im now ready to fit a new toilet in my bathroom. the New toilet has what looks to be a standard waste connection....
I need to cut the brick under the bottom of this hole. so as to bring the hole down one brick. this will allow me to run my ventilation straight...
Im going to tile this wall the wall on the right of the image below. however i recently realised that it was way more off level than i thought,...
im getting toward the point of sealing my aquaboard panels on my bathroom wall. Ive built a niche into the wall in the shower area so i want it to...
I have a 100mm channel width extractor for my bathroom that i need to install. the wiring is all done and in place. the problem im having is with...
Im currently building a niche in my bathroom as in the images below. I want to put 3 spot lights into the top of the niche shining down from the...
i need to remove a toilet from my bathroom, Ive never done this before so looking for some advice on how it can be done. The biggest issue is,...
Plumbing up the new shower, and it was time to get into the loft and fit the new shower head, in order to strengthen the head i put some spare...
Separate names with a comma.
Visiting from the US? Why not try DIYnot.US instead? Click here to continue to DIYnot.US.Dismiss Notice