How would you fix tiles to 100mm celotex
What effect are trying to achieve ?
Make a feature of that fookin mess ???
Just give it a coat of 5-1 Unibond !!! :ROFLMAO::ROFLMAO:
As said Previously make sure M/v is closed and pump off when filling.
Personally I would not disturb the Primary flow connection on cyl.
Are you sure it is piped as sketch.
The flow and return from boiler are reversed ie Blue should be flow Red return.
This should work on...
I presume that it is a solid fuel Rayburn!
Which model ?
600k in dark seems low.
Is it a LD
A photo of the burner would be good.
Did you measure its resistance .
If the Cb sees light during purge it will fire and lock out.
If you have worked on older burners with no solenoid, ZLO etc The motor is wired to...
10 MΩ in Dark
10 KΩ in Light
Not exact but very high and very low!
If you feel adventurous ........About 60ua current flow.
Have you measured its resistance in light and dark ?
IF THE CELL SEES LIGHT DURING PRE PURGE, IT WILL LOCK OUT, REGARDLESS OF THE FLAME QUALITY.
If the cell sees light during the pre purge (Before solenoid oil release) it will lock out after ignition.
With torch test grip FZ in your fist...
Did you keep pc in the dark until it ignited.
Rebar built into the piers and fill cavity with concrete ??
I used scaffold poles in 1 1/2 brick columns 7 ft high. 30 years ago
I removed one...
You will never recover the installation cost and subsequent servicing and repair costs.
I have had cancellations a few times without even being told.
Turn up at appointed time to find job already completed by others.
I have a brand new Pcb if you need one. Bargain price !!
Separate names with a comma.