I couldn't say to be honest. Pretty good paint thou. :)
I myself like matt finishes as the satin and silk always look to shiny. I ver recently been using Tikurrila Durable matt which is supposed to be...
Might be better with Zinsser Gardz.
Only needs to be 20/25% really. Don't use silk or satin. Has to be Matt, ideally a contract matt with no Vinyl in it.
Atrex on both.
That is a Supaglypta pattern. Most have been discontinued now.
As opps has said !!
The decorator is an idiot. You need a mist coat on raw plaster before anything else gets done. A thinned coat of white matt emulsion is all that...
Was originally made by Radcliffes I think. Great stuff, used it 40 years ago.
Don't think plaster board has ever contained asbestos.
The main oak window in the middle in Oak and all the other woodwork in Grey Anthracite RAL 7016
The Gardz is a specialist product which once applied anything can go over it. Paint or paper. Lots of modern sealers are water based, even for...
Zinsser Gardz all day long.
Doesn't have to be spot on that ratio, but the first coat has to be thin to penetrate the plaster. Its not meant to cover the surface to be solid...
Cant you get some heat in there even if its a mobile gas heater ?
"Gardz" is one of the products in the Zinsser range of sealers. Its no particularly cheap but fantastic on surfaces that have been coated with...
Can be about 60/40 dilute matt emulsion on ceiling first if its raw unpainted plaster.
If its raw plaster then a mist coat of emulsion is all that's needed before coating with finishing coats. If in any doubt as to what may be on the...
Walls need a thorough sanding first. Apply the paint with a decent roller and don't over roll it out too much or you will get dry edges.
Use a fan heater to direct warm air onto the plaster for a while before painting.
Separate names with a comma.