allows you to back up to a different location, then you would load the usb stick, or storage media into anther pc and the restore the files. save...
The led strip needs to see 12V. At default the back light is wired one end to 12V other to 0V. when you swap for the output on one of the legs...
Okay so that tells me its wired correctly. So you must have things programmed incorrectly. Thinking the only way you get to the bottom of this...
In the first instance, if you wire it up and Invert the output and revert back again you should be able to turn it on an off manually. fairly...
manuals in our industry are not the easiest to follow at the best of times, so your certainly not stupid. most of the engineers on here like...
you can scroll through the zones also I believe, have to say I tend to use Wintex or Keypad in engineers mode and editing zone setup attributes 1....
Search for PG1 there's a table with the outputs on. There are threads on here also but it is easier to search via Google sometimes.
have a look at your wifi channels, you can get apps which will show you which channels are in use nearest to you and how strong they are. swap...
You have a hard wired system? You want to go wifi? Why? What type of hardwired system do you have now?
The issue wrt to NVR's is what protocols the cameras support, if the NVR works well then there is no need to upgrade? If the system doesn't work/...
JohnD is the Yale expert to ask. if the programming hasn't changed, then the environment or the devices have. So have you changed the...
It is poor etiquette to post at random on other threads to try and get your issues answered. I will look for your thread and see if I can help....
have you tried the digioutput as suggested? Have you posted the wiring? Where are you measuring between? Seem to recall you may need a resistor...
Omit = Part Set 1 Chime = Part Set 2 Part = Part Set 3 Press No/ X to toggle Zone On (working in part set) Zone Off (omitted in part set) Type...
it needs a few minutes from memory to elapse but hence why asking how its wired and programmed. there are threads on here covering that side....
Photo cell makes the most sense rather than have it on 24 7, something the Orisec bells do have. If the timer isn't working, how is it...
The fire tones internal speakers are deffo different, the SAB for fire not sure. Think the issue isn't the tone but external SAB firing when he...
Normally closed or double pole. Sure this is mentioned on here before certainly a big discussion on the Texecom forum about behaviour. E is to...
if SAB output (bell trigger) is fired on fire alarm, I don't believe there is away to deactivate it. so be looking at something complicated to...
well looks like the sensor was faulty then. sensors usually wont learn on, because of a fault or already on the system. its hard to say whats...
Separate names with a comma.
Visiting from the US? Why not try DIYnot.US instead? Click here to continue to DIYnot.US.Dismiss Notice