No, it's plastic, made by Enduramaxx. The pump is stainless steel.
Rainwater harvesting tanks have to go through approval processes to allow them...
Bottom immersion is usually used for overnight heating on cheaper rate electric, top is to boost if you need it. These cylinders should be...
Yes, almost certainly evaporation
Not really needed for watering the garden though.
The reason for going up and down again is that it's much easier to both connect and service. You'd struggle to get the pump connected to the...
About £280 for a new board, plus fitting. Might be worth getting a pro in to get all this sorted for you. As others have said, you seem to be...
Jet Blue was an own-brand product marketed by Plumb Center. It was almost certainly actually Jet Lube, which is still widely available
Why won't it be straight? If it's that tight to get to, how are you going to be able to solder it safely?
This will give you a full report and advice on what treatment the system may need
This may help
And the boiler is?
Might still only be 20mm or old half inch and an upgrade to 25mm may be advantageous
You can do, but depending on what you have now it might be worth taking the opportunity to upgrade it. Do you know what size/material it is currently?
What makes you think it's an issue with the boiler rather than an issue with the system? Could be that the system wasn't flushed properly on...
You've created additional resistance in the pipework which is stopping the flow, I suspect. Can you post some photos? Upgrading the pipework a...
All a bit shoddy. Can you get the installer back to finish the job?
Main make a lot of different boilers. What model is it?
No, it'll just take slightly longer if it's cold
@Chris_W in some setups it can, yes, but not here. The issue is that the original BrainQ used its 2 wires in the same way that Nest uses T1 & T2,...
Separate names with a comma.