and Thanks Hugh,
I'll see what I can do about a photo
siphoned most of the water out already.
and I'll measure the pipe. I got a...
I have a blocked 43mm white PVC waste pipe. I have cleaned the traps underneath the sinks.
The internal pipe is about 6m long and has 2 sinks...
My house is rendered outside with dark grey chippings. It looks kinda dark and depressing.
Would it be ok if I brushed off all the chippings...
Well I did wonder if it was a thing but apparently it is
cheapest is £22
Ahhh, kind of makes sense. Much more sense than what I did.
What about upper pressure showing 1.3 when in use? I suppose if it was over...
Do you have to drain down the heating system before checking and pumping up the expansion vessel? Mine was 0.5 bar when I checked it which is...
Thank you, I have a SYMSI7 so that's good to know.
Can anyone tell me what the little tab which is included in the kit is for?
I'm just going to leave this here
Updating with the solution.
I searched and turned my whole house upside down looking for the washing machine receipt and warranty information to...
Thanks for the suggestion, I'll take a look and have a go. Update in a month or 2 when I have tried.
I have a Hoover w/m from around 2006, It has a burnt out PCB control module, Looks to me like a track has burnt through the board, no components...
32:28 - 32:40
33:20 - 33:45
Those horizontal lines every 6 courses he has made and he put some metal into one of them?
The filter was clean.
No recall for this model unfortunately.
Reset method does not fix the problem.
Thank you for your help.
Any trade in the UK here? I wonder how I can get trained in washing machine repair?
Anyway, This is about 2 and half years old, cost...
Ok thanks guys,
I will check that all the bi directionals are pointing in the right direction.
What happens if it is set in the wrong direction?
Yeah makes sense and what I thought, just wanted to know.
Found this link on the screwfix product specifications...
My Danfoss TRV have a very thin pin,
I unscrew the bottom of the main white plastic cover and the white cover pulls off to reveal the brass head...
I want to ask what is the best way after removing the rad, to connect a hose pipe to the valve ends on the system i.e. not to the rad?
Yes I agree, if the LS valves are all set correctly then you don't want to be closing them and losing the settings. But if like in my house the...
Separate names with a comma.