At the end of my kitchen worktop is a small stud frame covered in ply. I want to tile it to match the walls. Using Google suggested I use BAL Bond...
I'd use some of those hammer in fixings you can get. then you can just drill through the inside of the cupboard and into the wall without having...
To try and help this is a rough drawing of what the frame would look like from the side. No noggins or supports in this picture. I could actually...
In my Kitchen I have a small alcove roughly 400mm deep. Our boiler and gas meter is fitted in this alcove. Both are then surrounded by some hacked...
Just spotted stamped on the cable I've bought that it says H05VV-F so you're right about the coating. But any concerns about the size of the cable...
Hello I've bought this oven:...
The ceiling tiles are like what you would find in an 80's office. Dimpled white square things. Horrible. I reckon I'm probably just gonna...
Thank you EFLImpudence. I'm not at home so gonna have a good look at my CU tonight. However, the new lights have nowhere to wire an earth...
Okay that clears things up a bit. Is it likely that the master trip switch would be a RCD and then split down onto seperate MCB controlled...
Okay, if I buy some full price top quality versions will I need to change the MCB. Also is it right that the bathroom lights are on the same...
Hello, My bathroom has an ugly suspended ceiling. Attached to this is currently 3 light fittings. They have a screw on frosted ball which the...
Separate names with a comma.
Visiting from the US? Why not try DIYnot.US instead? Click here to continue to DIYnot.US.Dismiss Notice