If my only option was a flat wall, then I'd agree, but having the two side walls to use it would be crazy to attempt to put all the support on the...
Tools - I keep the bodies in my freezer mate, doesn't everyone? :evil::D It's been my tool cupboard for years, but it's a total mess in there -...
I'm planning on putting floor to ceiling shelves up in my old airing cupboard. 80cm wide, 50cm deep - secured on 3 sides to batons screwed to the...
Wow! Thank you so much for taking the time to write all that! Using a T&G only for the overlap was my original intent, but someone else advised...
Yes - my plan was to align the ledges with the preferred hinge locations - I'm going to have a crack at mortice and tenoning them - last one I did...
The doors are sheltered with both a roof overhang, and cladding overhang - although water will inevitably hit the surface of the door, no chance...
That's a cracking video btw - I was wondering what to use for a lock and the tips on using the screw positions to fight movement in the hinges is...
It's all kiln dried stuff though I'm using so unless I left it out for a few days before fitting I guess it can only expand. I'll be treating it...
My opening is 1835 high and 1365 wide - there is a little variance in the width, I think mainly caused by the trim warping slightly on one side so...
I'm not a pro, but all metal fixings used on cladding SHOULD be corrosion resistant - that can mean many things and SS is the most expensive...
So far I only treated the roof lining panels and painted them - trying to sand off the paint, but if these end up a little different it's no big...
Would something like this work? https://www.toolstation.com/wood-protective-treatment-5l/p93006
The exterior of my shed has a number of different materials. The corner posts are green treated fence posts The cladding is green treated feather...
Don't forget to factor in how long it will take to cure at this time of year. Depending on how wet your mix is it could take 2-3h - possibly more....
So my shed wall 3x2 cls studwork covered with 11mm OSB panels. On the diagram below there's also an 18x94mm door liner and a 20x38mm trim...
Can you not replace the side panel on the wine unit with the end panel - that's what I did with mine.
The fact it took a couple of hours is only relevant if they cut corners - the scaffolding costs probably the same as for 3 days - also not much...
My shed roof slopes front to back and the RHS butts up against a building, there's an overhang on the building of 20cm going over the shed roof,...
Ah - sorry thought I'd put in my OP, this is a raised concrete pad that will be entirely covered by the shed.
How would water "lie on the concrete" The only way the concrete can get wet is by soaking it up from underneath - I'm fairly sure that that will...
Separate names with a comma.