As an ocassional grinder user, i would miss the cool smell you get when A-Team McGivering metal in the man cave
When you lift it by the pullcord, does it just drop to the floor or will the pullcord hold its weight? Does it have much resistance to it being...
Could you run the pipes above the floor but behind the wall?
But surely your building walls ontop of the steel and could run the pipes shin high round the room or just have them come through the sole plate...
Could you run them inside the stud work of the wall?
I would start by getting someone to do some drawings, good ones that can be built from. Then at least you will have an idea whats involved and...
Hope it goes well for you my friend I recently fitted my first doors solo with no experience and found the latches and bolt through fixings on...
I had similar issues to lucid alluded to. I have recently installed 8 speakers in my upstairs extension im building. Bt speakers didnt do what i...
I would have had to straighten that and checked behind it at same time
Rather than flexi hose you could use https://www.toolstation.com/rigid-radiator-valve-extension/p86447 The do shorter ones and telescopic ones...
I have an Aldi breaker and the release mech is as shown. You already have it on release though, were you using it like that?
Are you sure it's not a 542p hedgecutter? From a ref chart it's either a c1u m42(or 32) https://www.stens.com/quick-reference-guides...
Hi, I rebuilt a mculloch hedge trimmer as my first project in small engines. I found that the gaskets were impossible to source for the model I...
Check there isn't another fault by turning it on without the motor attached. I recently had an issue with leakage from the heating element. I...
Of its one sheet surely just one in the middle would suffice?
Grey to switched live Black to neutral Brown to perm live is a guess Check the cable at the fan with a meter to confirm
I forgot to take a picture but it worked out well with solder fitting so thanks for your help I did notice that soldering onto the chrome pipe,...
Yes i read that on here! Thanks for the reminder though :cool: Can you solder directly onto the chrome or does it also have to come off?
Thanks Rob, i will give it a bash and lose the tape
Hi, Im replacing a microbore system with 15mm and have hit a problem with one rad. Its up against a wall that the joists run parallel to and the...
Separate names with a comma.
Visiting from the US? Why not try DIYnot.US instead? Click here to continue to DIYnot.US.Dismiss Notice