0.5m3 isn't a lot, not worth readymix. Hire a cement mixer?
Sounds like an awful idea, it'll just break up.
As said, I'd be looking at a grid system if you want to walk or drive on it.
Not that really shows the fall.
The channel drain is just in front of the steps. Flows into a silt trap (under the sofa) and then to a 2m3...
Setting the depth of cut too deep?
I too would feel a bit uneasy buying quite a dangerous tool for someone with seemingly little experience in DIY. The blades on these tools can...
I did my riven sandstone at 1:60, I would definitely use 1:80 if I could do it again. It bugs me.
Castacrete specify 1:80...
I'd always try and direct water away from the house where possible. What does the outlet of the bottle gulley connect into?
BTW, does the stone...
They are, but you want all your tools to be the same make so they all use the same batteries ideally.
Reminds me of this video, see 12:37
I did all that work over a few days which involved lots of bleeding, so can't be sure at which point the hydrogen stopped. But I haven't had a...
What a waste of time and materials.
I was getting hydrogen build up in a new install, confirmed by collecting and igniting! Ran sentinel cleaner (can't remember which one) through...
I use vanguard with their life strategy fund which is a low fee index tracker.
Interested in this, and the only one that convinces me so far that it might do something is the polyphosphate type like the combimate.
Or use fittings with changeable bulbs, e.g. GU10 so you can set the colour temperature and brightness.
You'll have a lighting circuit already, maybe even two (upstairs/downstairs) you'd extend off this. It's just a radial circuit.
Correct way round. Male flows into female.
Can't see why it would leak if elbows are correct way around unless it's backing up.
Just based on the dulux FAQ, I'd probably use the kitchen and bathroom specific ones if they were a different colour to what I already had. No...
I've just painted a couple of room in easy care and it was lovely to use, very happy with the finish and I'm fussy! Have wiped the odd bit down...
Separate names with a comma.