don’t know what you mean my s plan. Sorry.
I’ve been quoted as follows
Inlet Control Valve £60.38 plus VAT...
Ok. Thanks for advice.
can you indicate what needs to change??
Thanks so far.
here are some pics of what I have.
White pipe is overflow.
Red hand wheel is cold water supply
I have a water discharge issue via the overflow from my unvented cylinder. The cylinder is overflowing only when the cylinder is being...
Thanks for quick reply.
How do i diagnose / test this? I have all the covers off the pipe work at the moment and can see the two motorised valves.
Can anyone shed any light on the following?
Hardware: Eco tech 624 - System Boiler NOT combi with a pressurised HW tank.
What appears to be...
Well, thanks again for your help on this matter. it appears that for the £5 cost of the dual plate, plus some cable, I'll be good to go. I guess...
So, when shopping for oven and hob we found a job at 7.2 kw and an oven at 6kw. We were told that they would require separate 32amp supplies and...
Wow! Thanks for all your help!
So, so long as the hob and cooker are less than 15KW, I'm good to go with current installation?
Why do they not? Is it as simple as you dont have everything on at once? (all 4 hob rings, plus oven plus grill) But what if you do? Christmas day?
I'm now finding internet pages that tell me that a standard cooker installation with a 32A mcb / fuse can cope with 15KW?
Can anyone explain?
Just done a few calcs....
If supply is 240V and max MCB is 32A, then max wattage of oven and hob would be 7.6KW, which means the above will cause...
We have yet to choose the oven and hob.
We are aware of 13 amp plug hobs, but also been told that they are not that powerful.
A quick scan of...
Looks like I will be having a new double oven and an induction hob.
Both are likely to be 32 amp.
I currently have one 32 amp mcb in the...
Wife had the idea of heating the water via the immersion as it might expand the coil or soften the plastic wire.
This is related to a previous post.
It appears that i have a blockage in the primary coil of my unvented cylinder. I know this as I have...
Thanks for input!! Have you seen my update?
Repair man came today.
1. Said hw control valve was broken, so replaced it. But still no hot water.
2. Said air lock in primary coil so...
Thanks for reply.
Yes, plenty of water pressure.
If faulty valve can they be fixed easily?
Separate names with a comma.