Why don’t you get the engineer that service’s it to take a look at it before buying parts you probably won’t need.
If as I suspect you haven’t had...
We cut them tight to the wall using a 9ins grinder with a metal disc and a vacuum cleaner helps to keep the dust down.
Then fit a cast iron to...
Have you checked the shower hose is not twisted and the filters and non return valves in the shower valve are ok if fitted.
Clockwise is off anti clockwise is on
Did you fit the new hot water seal in the back of the shower
NO you can not make any modifications to an unvented cylinder unless it's approved by the manufacturer
The answer is NO
DrWho the wind up merchant
That's a common fault easily repaired you don't need a new boiler
Baxi make a balcony kit to extend the flue
Repairs are not normally included in a boiler service so yes a service and repair are two jobs
If you post your location there may be someone on this site close to you.
I would be looking for a blockage in pipework
take a magnet and see if you have a magnetic attraction on all the pipework around the area of the...
Brain dead today lol
You need to get a tap suitable for low pressure 0.2bar is ok for your installation.
Remove the non return valves in the bar mixer, you don't need them with a pump, that will increase the flow rate if that doesn't work you will...
Have you tried removing the non return valves in the shower valve.
Double check what you are connecting if you get it wrong you will be in big trouble
They are not a standard fitting you will need an rgi who knows what to do
NOT A DIY-ER
That needs fixing to a wall the correct way up pipe connection should be at the bottom of the unit.
The first thing is check the air pressure in the expansion unit.
It probably wasn't checked at the last yearly boiler service.
Separate names with a comma.