get him back an show him what you are talking about with the level? you might be too fussy mate , it might be a simple problem to overcome its...
why did you plaster it? you should of just left the plasterboard far better surface to tile, if you are using adheisive to hide 10mm i feel you...
overboard with hardie backer-board trowel over flexy adhesive to fill the voids then screw the board down ( where to screw is marked on the...
score the rectangle drill a hole in one corner then nibble the rest out with parrot pincher's
why not just recolour the grout ?
you should never tile onto tile .
preperation is everything in tiling get it all off mate
who told you that ?
batton the walls do the walls first apart from the bottom cut then do the floor then last wall cut
you can use 3mm spacers on the floors mate but that is the Minimum
grout after 24hours unless says different on adhesive instuctions then you are suposed to wait 2 weeks before using the shower i take it is going...
good call was having trouble getting me head around it lol
have you looked into ditra matt its only 3mm thick or Durabase CI Matting
you could try this...
i use ultra but there are loads of good ones mapei (not the one from b&q) bal, webber or even topps tiles own brand stuff is made by palace and is...
wp1 kit would be fine mate just make sure you don't use the tubbed adhesive use a good quality trade bagged adhesive
cant think of any witty replies :)
stick some pictures up sure we can come up with a solution :)
no need to use Epoxy grout in my opinion unless in a hospital or going to come in contact with food
use a good trade standard adhesive dont get it from b&q
Separate names with a comma.