I will try it tonight.
I am using a GD48 for my house alarm system.
I have the RSS for programming the panel.
I whant to create a user with only arming rights on...
Another question about gd
Can I link a zone with an output, if the output is not alocated to a group?
For the moment I cannot tested...
Hello, thanks for the answer
Yesterday I finished late at night, I didn't try anything.
I will see that monday .
The firmware is 7.02. I think I...
I have a strange problem with a GD264 panel.
So, when I try to set the system, a zone that is closed, change state and opens, and...
Man you are the best
I put a battery with 13.08 V, and now is chargeing to 14.3V
Super, thanks for teh info
The fuse under the AC/tmp/+ bat - bat leades is ok
Is there other fuse for the battery chargeing function?
After changeing the 12V back-up battery for my alarm system, I get only 1.4 V on the battery lead (red and black wires).
The rest of aux and...
Thanks a lot
I will check that today.
Thanks a lot.
By the way, other cameras have the live stream?
Yes, I know all that with ivms 4200
My question is what is the live view resolution? Is the mainstream resolution and in this case you can change...
Thank you for your answer
I am working with hikvision ip cameras for the moment and I can confirm that there is no settings for live view,...
It may sound stupid but I'll ask:
What is the resolution of a camera in live view mode? Is the mainstream resolution?
Or the mainstream...
Aniway....sorry, bad english, not a lot of practice:(
Exactley, thanks a lot.
Well, I am a security system engineer and now I do some tests for integrating honeywell with lenel onguard for a client of...
Ok, done and it is ok now.
It was my fault, I put the multimeter on the zone and common with the wires of the sensor unplugded.
I whant to know...
Forgot to say that the message error is from 16.08.2018. I can erase this?
On my GD48 panel when I enter the menu from my kepad I get the next message: 1014 A1 +tamp s/c. When I display the zones 1014 is closed....
Understod, thanks a lot. I will look on ebay to see if there is one on sale. If some one have the spi and can send in Romania..I buy
As a stand alone system GD48 with 6.7 firmware it works perfect. But I integrated the honeywell with another system and I have problems...
Separate names with a comma.