[ATTACH] [ATTACH] [ATTACH]
It depends on the supply type to the property, but it will often be replaced as part of the consumer unit replacement works
How new or old is the switch?
Although it seems strange I’ve found switches which have poor contacts and arc excessively when operated can...
I fitted 2x lap Euro module usb chargers at my sisters house. They were both used to charge a smart phone and or tablet nightly. Both failed...
The standard spacing I generally use is 600mm from each wall and then every 1200mm in between
It’s absolutely fine to joint the wires inside the new light as long as there’s enough room to physically get them in there.
I’m not familiar with the transformers you mention. Are they wire wound or electronic? Is it set up with one transformer per light? Can the...
Expanding foam works a treat
I prefer “chauffeur” to be honest
Well done. I’m proud of you.
No I’m asking you.
You used the wrong name at work then.
Will a 13A fuse fail before a 1.5mm² cable?
No. 4 way splitter is the wrong name for it.
Ahh ok a fused device which will limit the load to a maximum of 13A regardless of how many heaters you decide to plug in to it then.
Just post some proof. It’s really not a difficult request if what you say is actually true.
All lies which you have posted on this forum.
It is not a “crappy design”. It is not intended to be used with a lower load. You have posted incorrect information.
Separate names with a comma.