Hive won't control your hot water on this Worcester
Worcester fixed price repair might be an option for you
Photocell should cure it
Sounds like a good start. I'd hold off with the control box though fit that after the photocell.
What happens when you shine a torch in the...
There'll be an issue with your combustion. minimum has probably drifted out, or possibly a part has started to tear. A good service should sort...
What state is your blast tube in? Clean it up so it's like new, drill a hole through the fins in line with the photocell also if you want to,...
Second that. If it fires for 5secs it's photocell. Is the blast tube dirty? What version control box have you got? It'll have numbers on it
Solenoid coil resistance Is 2000omhs give that a test
Definitely got a good flow of oil?
Is it producing a spark?
It won't be that then if the motor is spinning?
What burner isit ?
Get your engineer to check the capacitor
You can't wire it yourself, you need a gas engineer as you're removing the boiler casing
Looking at what you've got I'd say 1.2m
But I'd definitely go for a vertical there
Collect tokens from the back of Kellogg's boxes, collect enough and you even get your gas registration
Set those pins in and it'll come on. The switch has failed
That clock on the front is your problem. That's the heat exchanger leaking, not the gasket
My advice is don't use it until you get it checked by...
No that was me
Green Star 28i junior
They're all DIFFERENT boilers!!!
They one you've got, GREEN STAR 28I JUNIOR has a casing...
That's not a 28i sorry
So the combustion has been broken, and not checked for safety. Good job
Mt10s don't fit on the 28i
Ummm thread title
Separate names with a comma.