This model has a diagphram and it could be that ?
Turn the central heating on and run the hot tap at the same time and see if it works ok.If so...
As someone who buys and sells houses pretty regularly i can tell you that certificates are not necessary.I have just sold one with a kitchen...
Try playing the flame more on the pipe than on the fitting.
So that's where i've been going wrong for 40 years :lol:
Don't they teach...
I was fitting these boilers in the nineties so you might want to think about upgrading as they were not the best boilers ever made.
The pump is...
a 22mm comp fitting will fit 3/4 galvanised.
P trap is fine & solvent pipe will fit a compression fitting.
I have done many on council contracts using flexi liner then twin wall boxed in through bedroom/whatever terminating in a vented ridge tile.
Help please with a 2006 ford fusion that has had the abs light on for about a month.we had the wheel sensors checked and the rear ones replaced...
You did not answer my question.
If the fan turns it could be the flue.full sequence,air pressure switch,venturi etc.
If it does not turn then...
I've still got some stick solder from times past 8)
Once froze a pipe and sweated a joint about 1 foot away....scary
Does the fan turn ?
could be you've got a cold water tank feeding the bath ?
Hacksaw......but like burnerman says it could be tricky :?:
I've been plumbing for nearly 40 years so it's easy for me to say but good luck if...
There are a few sizes so you will/might need to take a small piece with you.
probably 1/2 inch code 7 :?: but could be 3/4 so take a piece with...
does the lockout red light come on ?
If you can shut the water off then fit a leadlock fitting like this.
then fit a...
There are a few products for repairing cast. Is it broken or is it just a leaking joint ?
If cracked this might do it or even a GOOD silicone...
You need a male iron x copper like these
they come in straight or bent.
Separate names with a comma.