If you have prox keypads (CP38) you'll have a mare getting it seen by the panel.
If i'm connecting one I make sure I have a MK7 keypad (CP37)...
Galaxy or Texecom imo
White wire to +12v, striped black to the bell trigger
watch your ears.
.... then you should have bought a bigger panel
Not sure you can do this on a 9751/2. You can on an i-on and a Galaxy for instance.... as you...
Premier would have been a better choice imo
24 is an excellent wee panel.
sounds like the op is confirmed, not unconfirmed. Just bang it off the bell trigger, done.
Crap panel anyhooo :shock:
power to a contact now then?
Yes you can lose it and depending on what panel linked/programmed out.
output usually around 18v AC into the main pcb
I-on is a good quality system, we dont fit them but, they have a good rep generally.
We fit Galaxy, something like a G2-12 or G2-20 is the...
Yeah, if you've tried your code, pressed (A)to view the event, then (esc), and it still says reset reset the fault is still usually present....
Why would you like it to be graded?
It would only be graded if fitted by an approved co...
Reset the panic button/ what ever is connected to the panic Alarm zone. Until this is done the system is locked out.
Also how do you know the...
Maybe...... any time it moves it will reactivate your alarm, morning/noon or night ;)
I'd get it looked at, as it will only get a nuisance and...
It will show t then something else
t r1 would indicate a keypad for instance
t 18 would indicate zone 18
t be would indicate bell...
Pull the jumpers off the panic button if your not using the resistors.....(the way you've wired it suggests you aren't using them, put the lid on...
The time clock in my Towerchron T2003 has packed up after 20 odd years, so i need to replace the unit. I was thinking something...
Or stop set is enabled for tel line fail.
What panel is it going on?
Separate names with a comma.