Search results

  1. B

    New Water Main..Poor Dynamic Flow still

    Sorry for the delay, getting a gauge has been quite tough! Will come back to the thread. Far
  2. B

    New Water Main..Poor Dynamic Flow still

    Should get the gauge today and will report. I'll do flow and pressure with and without softener. Be in touch shortly. Thanks
  3. B

    New Water Main..Poor Dynamic Flow still

    Ok sure, have ordered a gauge and will report back. I presume as it is going up one floor and has one elbow that it will lose some pressure, but the flow seems low to me. Will come back here with an answer. Thanks so far Far
  4. B

    New Water Main..Poor Dynamic Flow still

    Thanks. This could give me a pressure rating internally. I see that there is a connection for washing machine with a small bore isolation valve. The cold seems to be coming from a sink circuit but behind kitchen cupboards. Would the small bore skew results? I guess I could get dynamic too by...
  5. B

    New Water Main..Poor Dynamic Flow still

    Thank you for the response. hmmmm - not quite sure how to measure pressure and flow outside, nor inside re pressure (obviously flow rates I can do). Do I need to cut and insert some kind of pressure sensor on the MDPE pipe? Far
  6. B

    New Water Main..Poor Dynamic Flow still

    Hi Team Firstly, I have done my best to read and get some understanding (with plumbers and across forums). I'm stuck and could use some help. - Victorian property, was on a shared supply. 15mm feeding my maisonette (one ground below). - New 25mm MDPE fitted with one 90degree elbow and 2 then...
Top