Search results

  1. R

    Swann camera power supply

    Sense up ? whats this, is it a setting that I can change on the NVR ? I'm still going to try a power supply so can you recommend one ? Cheers
  2. R

    Swann camera power supply

    Hi, I'm getting ghosting images at night. If somebody walks past they look partly invisible and I read somewhere that connecting a separate power supply would sort this, also why is there a power socket at the camera ? Cheers
  3. R

    Swann camera power supply

    Hi I have the swann NHD-885MSB cameras and I want to install the additional power supply for better night vision. can somebody tell me the voltage required and the pin size or better still recommend a power supply that will do the job. many thanks
  4. R

    9651 panel

    No I left all the settings the same
  5. R

    9651 panel

    When the blue light comes on I,m led to believe that’s a trigger of the sensor. I’ll turn the microwave up and check again. I,m not back at the property till next week so I,ll update you next week. Cheers
  6. R

    9651 panel

    Hi, Pirs are Pyronix (DT) KX15DT. Cheers
  7. R

    9651 panel

    Yes it is a new install, option 21 is default closed circuit but yes I will have to double check that. I was doing the walk test in customer mode, is there a difference to engineering mode?. Yes I can leave engineer mode and the system will set in A ok. The passives do activate but not first...
  8. R

    9651 panel

    Hi sparky marka, yes I,ve checked and all the zones are programmed to A,B,C,D and there will be no night settings.my question is why are the passives not sounding at the keypad when I do a walk test, they only sound after they have been triggered after a couple of times, also the door shock...
  9. R

    9651 panel

    Europlex you need to take a chill pill mate. The manual is a bit hard to work out hence why I,m asking the experts to tell me in plain English, if you don’t want to help then don’t reply to a post.
  10. R

    9651 panel

    Hi, Not sure about the A,B, C, D is that the attributes for each zone? Zone 1 is entry and exit zones 2 and 3 are dual pir and 4 is a shock sensor on the back doors. I don’t need an access route on any pir they set the alarm and leave. Can you tell me what I need to program the zones as and the...
  11. R

    9651 panel

    Google just brings up the manuals. I’ve set them up now but i’m Having trouble with the walk test, zone 1 door open sounds ok but the passive don’t sound first time, I have to get them to trigger a few times before I hear the tone from the keypad and the shock sensor on zone 4 won’t sound at...
  12. R

    9651 panel

    Hi, Can anybody tell me the default zone and attribute settings for all 8 zones in the panel ? Cheers Chris
  13. R

    Paint over blue border

    No its not a paper border its painted onto the wall.
  14. R

    Paint over blue border

    Hi, I have a cream coloured room with a blue painted border running around the walls and I need to get rid of the blue border. Can somebody tell me the best way of doing it? do I just keep painting over it with the new cream colour untill it disapears or is there a better way of doing it...
  15. R

    Shut off tap

    Cheers for that, I'll give it a go tonight.
  16. R

    Shut off tap

    Hi, I need to shut the water off to a property and I asked the owner where the shut off tap was and he told me it was outside with the water meter. I found that next to the water meter was a plastic rod sticking up which I thought you just turned to shut the water off, it wouldn't turn and It...
  17. R

    Fixing to stud wall

    Hi Can anyone help, I need to hang a 32" LED TV to a stud wall that is made up of plasterboard and the metal supports. I can get a fixing into 1 of the metal studs but the other fixings for the bracket will just be into the plasterboard. can someone tell me which is the best fixings to use...
  18. R

    How to clean decking?

    Hi, I need to clean my decking but my problem is small leaves in the grooves of the decking, I want to use a brush and dust pan but the leaves go under the pan because of the grooves. Is there a special pan or shovel you can buy that fits into the grooves so the leaves can be cleaned up, if...
  19. R

    Mixer shower

    Hi all, My parents have a mixer shower and when the lever is set to hot the water temp is only 30 degrees. I've checked the water out of the tap and that is around 58 degrees, this is from a combi boiler. How do I get the shower to run hotter? is there something inside the mixer that I need...
  20. R

    PC Cooling - the DIY plumber's way...

    Do you cool the water with a small chiller or is it just ambient cooling. Cheers
Top