Search results

  1. W

    Diplomat adp8322 stopped working - no lights at all

    measuring voltage with multimeter
  2. W

    Diplomat adp8322 stopped working - no lights at all

    Hi Zipper Went back and checked mains voltage coming in to interference filter, get readings of 215v on blue(neutral) and 245v on brown (live). These readings are also output on the dark blue wires out of the filter, and get same readings in and out of switch, also get the same readings into...
  3. W

    Diplomat adp8322 stopped working - no lights at all

    installed new pcb...no difference, double checked power to on/off switch on dishwasher, (blue wires) get 250v one side and only 212 the other side, is that right or should it be the same each side ??
  4. W

    Diplomat adp8322 stopped working - no lights at all

    All LED's still dead, have checked door lock, got power on both sides, and get zero resistance on meter when door closed, so assume that is correct
  5. W

    Diplomat adp8322 stopped working - no lights at all

    Hi Zipper, have had pcb checked, all is ok on it, have checked pressure switch, this is working ok, what & how other components can be checked? appreciate your help thus far. Forgot that 1 inch or so of water was left in the machine, Ie hadn't pumped out properly, would this indicate pump...
  6. W

    Diplomat adp8322 stopped working - no lights at all

    Hi Zipper, that was the service number. Checked all resistor seem to measure ok, none of the caps look blown. Not sure about the relays though, seems as though the switch is not closing (for both relays), but is this because the cycle is not running and these are controlled by the on board chip...
  7. W

    Diplomat adp8322 stopped working - no lights at all

    traced the power lead and found the bit, voltage in & out, also found current into pcb...tested components on pcb with multi meter, found one which was u/s, replaced it, but still no joy with power or lights.... :(
  8. W

    Diplomat adp8322 stopped working - no lights at all

    thanks Zipper, will try that and let you know
  9. W

    Diplomat adp8322 stopped working - no lights at all

    have checked and changed the fuse, seems to be power coming in to the machine, but no lights at all on any of the displays...is this pcb related ?? Have checked all the wiring etc, all seems to be intact, no brakes...
Top