Depends if said taps are at one end or in the middle against the wall!
Usually not but can be a bit of a fiddle. [plumberspeak for £120]
AFAIK all plastic 110mm pushfit soil/drainpipes have the same standardised OD: you can mix and match fittings.
More importantly, how do they get the champagne cork in?
Any here ever managed to reseal a half-finished bottle with the original cork without...
On underground foul drainage?
Inspection/rodding access required at every change of direction or gradient.
2 Not a make i recognise but the good folk here may help
That picture screams to me "Touch me at your peril."
Your plumber (probably) went into your loft to check the alignment of the pipework and if there were any any vent points to release trapped air....
Generic minimum clearances
Grub screw has a recessed end for a hex (Allen) key (2.5mm IIRC)
You could take your handle into your local motor parts shop and see if they...
Some say the Prussians were a touch tardy in showing up only when the Old Guard had been turned back by Wellington's troops; others that the...
Have sourced and fitted one, can't remember offhand where from.
And we'd just finished kicking the s*** out of the French at Waterloo (not the station).
George IV was King of the United Kingdom of Great Britain and Ireland (and also King of Hannover) in 1821.
Sounds like a plan.
Pipe insulation as sleeve will be sufficient.
Silicone for me, judiciously applied, only where and when required and certainly not gumming up the threads.
I wonder this myself.
Is the Joule just an RM in a fancy jacket and higher price tag with identical guts made on the same production line?
Loctite 55 onto roughened threads.
Separate names with a comma.