i live in a bungalow and a bit of paint has come off / flaked off at the bottom of the OUTSIDE wall. It's only like 2mm depth, but...
Do i grout or silicone the internal corners?
It's above hon so no water will be in contact, just steam obviously.
the upstand is 12.5mm thick and the tile is 8mm but i will have adhesive behind obviously.
Tiling above my upstand...
Do I need to leave a silicone gap between the upstand and the tile, or just butt the tile up to the...
I'm tiling my chimney breast with these tiles, below.
Do I treat each wall (top, left, right, back) separately, starting from the middle, or do...
I have a door with normal kitchen hinges so I can use that?
The door will cover the boiler but I will be boxing in pipes
Boxing in this boiler.
I have got a kitchen door front and also an end panel for either side.
Should I just screw timber to wall (vertically) and...
I bought a snug fit pipe collar and it neatened it up nicely, just a bit around edges that you can see but doesn't look too bad
I sill remember...
Can you get osme sort of pipe collar for outside to hide some of the mess from my core drill?
Installing zenith compact laminate worktop next week
Here is general kitcjen layout
If we say worktop length 1 is where window is and...
It's zenith compact laminate.
It says to just ue biscuit joints? It's square edges.
He connected it all up to my feed to the previous pendant light that was there.
Seeing how slack he was, I assume its all he had.
Because the light only has 2 cable connections for each side (in and out)
What could the black be used for... The lights work as they are currently
As in the thick grey cable that encases all of the wires? It looks too thick to be clamped under?
As per yesterday, you say I'm also okay to cut...
Hi, sorry yes I know you did but I couldn't make full sense in my head. So basically as long as they go in the blocks that's all needed. Thanks....
I am installing a zenith compact laminate worktop next week. As all I'm using is biscuit joints in the corners where worktops meet there won't be...
Please can someone confirm this is right before proceeding?
To terminate these earth wires do i terminate them both into the same side of the...
Installing zenith compact laminate worktop
Is this all I need? :
Clamps (worktop/ adjustable ones)
Circular saw (to cut...
Separate names with a comma.