Thanks guys. I knew about cutting with laminate side face down but wasn't sure if it applied to track/plunge saw
I realize this has probably been covered before but what is correct way to cut way a laminate kitchen worktop with a track saw. do i cut front to...
quick update. i bought a new humax freeview recorder and its working fine. thanks for the replies
Thanks for your reply.
Have tried the software update, but doesn't seem to have worked. Will look into getting an emulator.
Spoke to Humax...
I have recently purchased a new LG 4K Nano Cell TV in the hope of using it with my Humax Fox HDR T2 box.
However, while the TV works on the...
you paint such a pretty picture puller
it wont hurt
yes 3 nos
triton aspirante lovely shower
my moneys on pan connector
yes flow opposite vent is usually the way to go on vertical rads. are there no instructions as flow often has to be on a specific side for rad to...
yes more ptfe. i always have 12 wraps
I would try to make some sort of rubber gasket to sit under pan then when you tighten screws you should get no movement when sitting to do the biz
I plan on having amtico fitted in my bathroom which is being refurbished. the firm who are going to install it sent a guy to measure up. I...
i have just bought a new integrated washing machine and suprise suprise the hinges on the door panel do not match up with the hinge holes on...
no perceptible drop means 1/4mb on water gauge or 0.25mb on electronic gauge over period of tightness test ( usually 2 mins in average size house )
big downside if you get a leak under your expensive tiled floor :wink:
Separate names with a comma.