Thanks GalaxyGuy your advice is spot on as always
Thanks GalaxyGuy your advice is spot on as always. I’m up and running with ProxKey tags
I also have prox keys, but they didn’t seem to work to set/unset. I added the serial numbers manaully via Users menu option.
Is anyone able to offer advice on the flowing:
I set the alarm using + A when leaving
When entering I used [code] + Ent but the alarm...
Just wanted to let you know, I took your advice. Replacing the fuse and wiring as you instructed solved the issue.
Okay i’ll try that. My bell has an internal battery. Originally i connected H+ to 12v bell
H- to 0V
R- to bell
Bridge T to 0V
This blew the...
Yes i’ve just checked the fuse using a multimeter as per sircerebus666 and it is blown.
So I just need to connect +ve and -ve as...
I didn’t as I left my multimeter at home. I will check tomorrow. I hope galaxy guy gets in contact. Thanks for your reply. Vin
I'm hoping someone can help me. I've recently installed a Honeywell G2-12 into my home.
I've installed all the sensors and everything was...
Thanks Ollski, i did this setup originally but dont think the boiler or heater turned on when pressing the silver buttons in the hub... maybe i...
Can anyone help me with the wiring of my programmer to hive? There’s 6 pins and Hive only has 4! Also i have two thermostats.
Great diagram. Mine must be fully pumped as i have two valves, on for CH and one for HW
Just to let you know. Connecting that wire worked! Thank you.
Last question, what is the diferwnce between gravity fed/part pumped and...
Yes, definitely dual version as I have the two buttons.
I think I realised my error. I removed the link between pin 5 and live....
I finally got round to giving this a try.
I kept all joins (pin B & D) the same
Neutral = Neutral hive
Live = Live hive
Pin 3 = HW...
Hope you're well.
Just want to clarify. Would you agree:-
Pin 3 = HW on
Pin 5 = CH on?
This information is great! I feel very confident. Just need to get my head around the circuits.
Where i struggle, Pins 1&2 are not...
Can anyone help with the wiring of my EP6002 programmer to Hive?
I also want to remove the old thermostat and wires
I've read this post but i'm not sure of some of the woring as my wiring looks slightly. Can anyone help me with my wiring diagram?
Its the Honeywell app. I left it as default
Separate names with a comma.