Silly question time. Just powered up my system after building work, it was in hold off before I powered it down.
How do I take it out of eng...
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] Hi,
Can anybody advise what is wrong with our Apple tree and what the cure is.
We want to create a new downstairs toilet in a 30s built house.
Space is limited and have a width of about 960mm and depth of 1100mm from the...
Thanks all for the advice
The house was built in the 30s, Im guessing the floor was put down later and maybe after central heating was installed.
If it is tar/bitumen would...
I have finger parquet flooring in our hall and dining room. We are rewiring and renewing heating.
The parquet flooring is in very good...
The Premier Elite 64w that is fully wireless.
I have builders coming in and want to temporarily disconnect the power from the panel and remove...
Sorry it’s my terminology.
When arming the panel emits a tone which I would like to turn down the volume or if not off.
Just leaving the keypad...
I would like to know how to turn the panel chime (think that's the right term)off or turn the volume down on the panel when arming the system via...
Thank you for your assistance.
I left the system on all night and miraculously its working this morning.
Although I left it for ages yesterday...
Not tried that yet. What I don't get is that it was all working fine before I moved it to the new house.
Thanks for the suggestion, have done all that. Exactly the same in a different zone..
Just reinstalled my 64w
All PW-W PIRs working fine.
But I have one DT-W that keeps giving the error 'radio not ready wait b/f arming'.
Thanks, yes the tamper was not closing correctly.
I am just re installing a 64 w and have a Tamper fault on a DT-W. The keypad is showing tamper fault and call alarm co. for service.
Thank you. Probably a daft question but how is the Mesh recommissioned.
Just moved into a house with a Scantronic 9800+ and am replacing it with a Texecom.
The scantonic is serviced and working but don’t have eng...
I flashed from 5.00.02 to 5.04.01
I was hoping that the previous programming would remain, have it on wintex so no great issue if its...
Have moved houses, taken the Elite 64 with me and am now ready to start the system up.
Have flashed to the latest firmware.
My questions are....
Activated in a box, sent back for replacement under warranty.
Thanks for all the comments
Separate names with a comma.