Our double patio/conservatory doors are jammed shut.
The lock has always been stiff and you could only really turn the key by pulling the doors...
Is it possible I've damaged anything when taking out the PCB?
Seems unlikely as it's still the same fault and no new errors?
Not what I was wanting to hear.
Could it be the same fault I've seen on here where it affects all the lights - the C17?
Wires were in the heater. Water was also heating up - could feel through the glass. Terminals gave a reading of 30 ohms using meter.
Have used the site before - was hoping rocks1 might be able to help out again?
Had flashing lights - top and also on/off.
Have replaced relays on pcb and connected all back together. Tried machine today and washed but...
Managed to replace relays on pcb and connected all back together. Tried machine today and washed but would not go into final spin....
Thanks for all your help yet again.
Just hope I can put it all back together!
Should the connectors come away by hand or should I use pliers?
Do seem awful tightly fixed - some not budging!
Okay - have managed to locate and remove screws.
There looks like there are a lot of connectors linking to the pcb housing (assuming that's...
Looking at rear of machine there is one screw at bottom left and a small rounded cover above with two screws fixing it in place.
Are the four...
How do you remove the pcb?
Looks awkward to get into?
Thanks for all your help up to now
Measured with a meter getting a reading of about 31 ohms.
Is that too high? I know you said 25 ohms...
Okay - can get a meter and know how to use one.
Where is the heater and where do I connect the meter to?
Erm - how do I check the heater?
Total novice at this
It's the washing enhance light that is flashing - this I know relates to the heater relay.
Does this automatically mean I need to replace the...
Thanks a lot!
Thanks - thought that might be it.
Easy enough to fix?
Machine stopped spinning and door locked light will not come on all though door locks.
After some footering I got the door working again, but...
Separate names with a comma.