I am about to put in my insulation between the rafters after my electrics first fix,
The question being do I put the insulation in so...
What glue do you recommend?
Thanks... i bought some 100mm nails to see if they are the right size.
The screws are going into the firrings i assume and they dont need to pass through to the joist?
Thanks...something like this for 18mm TG boards
Cheers bud i will check it out!
Woody are the nails meant to be skewed in then? not directly into the side of the noggin?
How did you get on with this speedyrazor? Im about to do something similar but i am having a 2 way fall.... going to each side of my...
As the title suggests...are these screws ok to use? I know they are designed for floor chipboard/osb but was think they would do the...
How many nails per side of nogging? 2 or 3
Is there a nail gun that takes that size nails? Everyone ive seen for hire is max 90mm
I will be framing my flat roof using 9 x 3 timbers.... what size/type of nails do i use to brin git all together (noggings/overlaps/framing...
I will be attempting to frame my own 100sqm flat roof my self!
Will be using 9x3 timber all round.... what type of nails and sizes do...
Looking at the attached plan... with the joists running left to right.... which joist size would be suitable:
Ive heard there are noise issues with grp and epdm? i dont really want it sounding like a tin can.
Yup read my mind - i was thinking left to right.
The firrings will provide a ventilation gap plus im planning on using slightly shorter noggings...
Would anyone be able to suggest the best way to frame this flat roof (cold roof because of height restrictions)? Will be using C24 9” x...
As the title suggest whats better? I know PIR is way more expensive than XPS but dont really know any other pros/cons?
Thanks :) thought i was going down the wrong track then
No - as in filling around the edges with the dig out soil after the dpc blocks were laid....the hardcore will go on top of the soil.
Separate names with a comma.