Cement oxide colour through the dash receiver would have toned it in better.
Warm roofs require deeper fascias which don't look the best on your average buildings, I would full fill between the joists.
A clamping plate.
Multi doesn't sand as good as easy fill, the rest of your plan sounds fine.
If the roof is still serviceable it can be repaired and the ridge re-bedded if required.
Older roofs (rosemary tiles) become brittle and becomes...
Get the £60 guy to re-bed the new verge tile ...get your garage roof done before winter, the verge can wait.
You think you've seen it all.
It should be fixed/ screwed down through the roof and the grp run up from the existing roof and under whatever cladding they are using for a finish.
Somethings not right going by the cuts ..a pic with the tarps removed and a bit further out would be better.
There is no quick fix, it can be made watertight but will always be a weak point.
I diverted mine out of the flat roof into a new stack and ic.
The concealed gutter would need removed....
Don't let anything go, you are paying your hard earned cash for a professional job, you are a long time looking at it..nip it in the bud...its not...
Depends what you are willing to accept aesthetically, it will be less noticeable if you are painting it.
Regardless of the beads it's still not...
They probably used what they had to hand.
Speak to them before making payment.
Corners should be clean sharp finishes you will not get that with...
Tell them to finish the reveals properly.
Take a pic further back, what have they used sand and cement?
That's the wrong beads they have used for...
Op, a pic taken further back would help, how many steps do you have to front door.
It needs finished properly, did you do it yourself as its not tradesman quality work.
At a minimum the reveals need another coat to bring the...
Pics not the best, much tidier with a bonding gutter imo.
He should have used 7kn concrete blocks on the outer skin, thermalites on inside wall with cavity infill.
Get him to put 100mm rigid insulation in...
Separate names with a comma.