Run a cleaner thou it. It's scaled up
Yes it's true
You can't programme it. Needs a smart card and reader cost £150.00. Or a company laptop from hotpoint.
Sounds like you got a leak in the base of the dishwasher. The anti flood system has kicked in. Tip it up see if water comes out of the base.
So is it working ok now.
Get a fruit shoot bottle fill it with hot water then squirt it down the hole. The reason why is the bottle is easy to handle and squeeze hot...
Rear fan is rubbing on the metal cover. Refit fan and check rear cover not bowed
Drum bearings have gone , complete welded tank cost about 120.00 for a new drum. You can 1 scrap it 2 call hotpoint who will supply and fit it for...
Check the front pads and the lip on the front of the drum. Poss worn pads or drum lip split
That fault code means time out draining. Check waste pipe not linked or crushed also check sink spigot.
Connect the inlet pipe to outside tap make sure you raise the waste pipe up a metre high to stop it siphoning.
Only way is to test it. Circulation pump might have seized up.
The first part number I gave you is only 2 MM extra on the side. But 5 ft long so use that and cut some off.
Or drill a small hole 2 MM. Near the other hole and use the same screw all your doing is moving the screw hole a few cm.
The front duct cones with a seal on it. But is now obserlete. You can try 2 seals one the vtd range. Coo142613 , 14 MM. Or coo276750 16 MM. That...
C00307120 complete kit. eBay about 10 /15.00.
In short no. They are 10 years old now plus. The water bottle was down the bottom new ones are at the top.
Check motor brushes worn down.
Are you buying a genuine part or a copy. Copy parts don't last long as long as the condenser is clear and has good air flow it should be ok.
Put it on dry cycle. See if it gets warm before the error code comes up. That tests the heater. Check the black themister on the heater box. It's...
Separate names with a comma.