Thanks very much. Makes sense to me. Also eases much concern, so thanks.
I was wondering how to benefit from the increased 25mm.
A question on the below post please...
I'm sure the above answers my question, but I don't think I've enough between my ears to...
I see this has been covered before, and I've searched, but grateful for a bit of advice.
Thames Water have been renewing the mains and...
Trouble is trying to build it on the ground, then making sure it doesn't foul the clips when trying to seat it.
Down pipe is clear
Gutters are clean
I am sure of both.
The rest has question marks. No idea when the plastic replaced the iron.
But looks like...
Firstly, gutters are 3 storeys up, I don't ha e a ladder, nor head for heights to fix this myself.
Water comes off a large gable end, rushes...
Will the hot water cylinder still be filled by the boiler system, if the hot water side is turned off? Thanks
I'm not really concerned about what is tripping the circuit. I'm going to leave that to professional to figure out.
What I would like...
We've moved into a "new" old house.
We have the following
- Vaillant Ecotec Plus 637 boiler
- very old copper hot water cylinder in...
So if I put new circuits in a currently occupied and old house
Do the sockets need to be the "new" Building Regs height?
Thanks very much.
We'll be getting private building control, so hopefully more sensible.
But just in the planning stages at the moment, so...
I've got a Victorian house with tall skirting boards.
The sockets are in the skirting board. I want to limit disruption to the skirting and...
Just wondered if anyone had used this before?
It will be used to remove woodchip wallpaper.
I know of the...
All sensible, thanks guys.
Guessing a valve on the shower waste would likely create potebeissues, if restricting directional flow?
We are going to have to put in a Saniflo. It's going into a new ensuite.
I'd rather not have the sink and shower running into the Saniflo, as...
Haha! How you don't want it to end up.
Unfortunately, not a bedroom. Which I why I'd considered Open Web Metal joists but they seem to start at 200mm
Thanks, that's interesting. The rooms above are a bathroom and also a "plant" room (boiler and invented cylinder). Might having such tightly...
Thanks. Its just as useful knowing what you are better off not doing, than going down a rabbit hole and spending a fortune
I had hoped there was some "super slim" solution, closer to 100mm.
But, looks like I'm dreaming :)
Separate names with a comma.