I'm looking to replace an electric fire with a gas fire. Can you get gas fires that you can connect a flue onto as I have no chimney.
Ok. I just don't want this building up again and having to pay for another engineer.
I spoke with the technical department and he gave me some things to get the engineer to check. He took the main panel off and fired it up and it...
I'll give them a call.
I started having problems with my boiler about 2 weeks ago. The boiler was coming on for a few minutes and then the fault lights flashed...
I would like to sand down my wood worktops and re oil them. I have had them now for about six years and they are looking a bit rough.
One of the sets have 3 coming out and the other set only has two.
There probably is no way then.
I have bought a set of string led Christmas lights and connected them up to a plug to come on automatically. However every time they turn on,...
I am looking for a few pieces of furniture made from Sheesham wood, but I'm having trouble finding each piece to match.
I don't have any...
I've recently bought a second hand Hilti cordless drill off a friend, but he had broken the charger and it now doesn't work.
He told me...
I was thinking of routing the strings, but with the stair kit I've bought it say's there's no need, triangle pieces of softwood have come with it...
I'm making stairs in my garage.
I know it would be cheaper to buy them or pay somebody, but it's more of a hobby as well. I'd like to learn how...
Ok, I'll stick with what you first advised and sand it down after.
Thanks for your help Ian.
The reason I asked is because I saw this diagram http://www.onboardwithmarkcorke.com/.a/6a010536216f64970b01675fda359a970b-400wi
It's 25mm MDF.
Does the bearing need to be chamfered, so it doesn't create a step.
Can someone please tell me the best way of putting a bullnose on the edge of MDF?
I have a router, but haven't got a jig. I have had a...
I was told that my machine (which is 500 litres per hour) was sufficient.
The grease is baked on, so it's not soft. It's not getting the...
I have a Nilfisk E130.2 pressure and would like to know if it can lose pressure. When I use the normal fitting, the power seems consistent,...
Separate names with a comma.