I have built a brick surround for a multi fuel burner to mantle height. is it ok to complete this to ceiling height in studwork, assuming I...
This chap has loads of garage door seals and is really helpful. I have used his myself
Assuming a VCL is required above the deck and under the insulation on my warm roof, whats the most economic and efective VCL to use?
My plans are asking for: Vapour control layer, 12mm marine WPB & 110mm polyfoam roofboard, foil faced and single ply membrane :?
It makes me...
Thanks fotr all that chaps. Roof consult is also a helpfull site.
cheers woody. Sorry should have mentioned a vapor control layer over the sub deck.Wouldn't all these screw holes ruin that?
With warm roof construction, how does the insulation glue/fix to the sub deck and then how does the top deck fix to the insulation prior to...
alastairreid, How do you re-nail the slates?
What advice or special tools would I require to remove the bottom two rows of eternit slate from my roof? This is to allow a flashing to go...
It sound like the PCB is being fooled into thinking the doors meeting an obstruction which normally indicates a problem with the bottom safety...
The permaroof site is excellent. I am just having a careful think about whether I have the balls to do this myself :D
hi roofline. Kings Lynn, Norfolk.
Sure you've been asked this a few times already but here goes anyway.
New flat roof and unsure of how to cover it. I don't fancy felt,...
600 blocks and 1.5 thousand bricks, layed, will require roughly how much builders sand and bags of cement?
I have done a complete renovation and discovered the hard way that £70.00 delivered for a cubic meter of concrete is not bad value for money :D
I,m fairly happy the boiler is ok and I may be wrong but the boiler itself can't causer the RCD to trip. Is the most likeley cause a...
whats the rule of thumd you chaps use for ordering your building sand, allowing me to work out a quanity to have ordered, taking into...
Have a stoves electric cooker that trips the mcb when you turn on a particular ring. The heater element, hot plate and switch /...
Separate names with a comma.