Yes thanks anyway secureiam
Yes, I notice that as well the bloke who fitted the alarm 29 years ago must change colour halfway through. yes, zone 2 is the landing PIR blue and...
Wired them together still no joy will check the run of wire in the garage some of it looks a bit ropey
I will get back to when I've checked it....
OK tried wiring like said above but no joy when I try and set the alarm the zone 3 on the panel with the new PIR just stays lit and get a constant...
I see thanks for your reply much appreciated
[ATTACH] What are these jumpers for can't find any information about this
Thanks again sparkymarka
Does it matter which way blue and yellow go and do I leave all jumpers as they came as
Thanks for your reply
Need to change a 29-year-old PIR in the garage been going off during the night.
Got a Texecom premier elite dt afg-0001 to replace the old one...
OK done what you said seems to work fine see how it goes thanks for your help.
The original alarm was done by IAAI Installer 29 years ago, have look in the PIRS and they have two tamp wires and pos /neg
this is the old bell box and panel
Hi will try that how would I go about wiring correctly?
Bell box connections (A) red/white12v (B) Blue Bell (C)Black Tamp (D)Yellow 0v (S) Green STRB
They are what I labelled from the old panel and...
Hi, It's a Texecom Odyssey1E and a Veritas 8 panel both brand new.
Bell box connections (A) red/white12v (B) Blue Bell (C)Black Tamp (D)Yellow 0v...
OK, guys alarm working good but reading the installation manual it states they should be no link in (D)0v and (C)tamp no other wires in these...
Thank you all working now
OK got as far as turning the zone of in prog 51 then pressed part, alarm set PIR was off on landing opened front door alarm went off no sound from...
The PIR is zone 2 that I need to put in the settings then at night how do I set the alarm sorry for being so thick first time ive done this
Separate names with a comma.