Our ceramic hob is held in by spring clips. Gently prising up with a screwdriver should lift it. The rubber seal on the worktop could be a bit...
As no expert has replied yet I think the lack of tube is correct, it drips onto the top of the motor & evaporates.
If it has a working 3 way fridge, its worth quite a bit alone.
I also have an old Video recorder connected through a scart lead.
Some scarts do not have all the pins connected, try & get one with all the pins...
after a bit of messing about I find it will work in a folder called favorites but not in a folder called Bank.
Also I have a folder...
I have repeatedly renewed the favourite.
But it does work of the descktop shortcut.
Sorry just keep getting an error message.
Could anyone tell me why some not all of my shortcuts in the favourites list will no longer work?
This problem has been ongoing for a while now....
Last year I had a new mains cable laid as we were sharing a mains with next door + no earth.
They cut & dug a hole in the pavement & an 18"...
I think the plumbers would like a photo of the pipe arrangement under the sink. Showing the hight at which the drain pipes come into the U bend.
I have come across them on a rad I bought from B&Q. I think they are to allow the rad to move slightly when expanding & contracting.
At the head of the email is about 100 addresses all of whom are pensioners I assume.
I don't see anything wrong with the figures stated.
An email I have just received. All very true
Oh BRITAIN, where did we go wrong?
We're "broke" and can't help our own Seniors,...
I had a terraced house c1910 & the plaster was bowing off the wall in exactly the same place as your photo shows. I had a damp survey done & it...
She will have change out of 6 boxes.
Im no shower expert, but is your combi not turned up to high if its scalding.
Most people around our area seem to to put the good side of the fence facing themselves.
The same happened to a pal of mine a couple of years ago.
& toasting your arrse. :P :P
I cut my cast iron pipe inside with a 4" angle grinder & finished of with a hacksaw. Cast iron cuts easy with a good blade.
A bit dusty with the...
Separate names with a comma.