Just wondered if anyone can help, I currently have a concrete imprint drive that has been laid well over 10 years ago and has never been...
Anyone got the hive outdoor camera??
Is it any good??
I’ve been given a good quality pub bench today, it’s looking weathered but still in good condition, can anyone recommend a good oil/stain to bring...
Hi, what’s the easiest ccct to setup and install??
I’m looking for 4 HD cameras and a good hard drive.
I was gonna buy the hive outdoor camera but...
Sorry wrong pic attached
Hi, my decking has been down roughly 10 years, initially I treated it with a stain but it looked rubbish.
Over the years I have used the stuff in...
Hi, just wondered if anyone can help me with an issue I have with my concrete imprint drive.
It’s starting to look tired and I want to bring it...
Hi, can anyone recommend a good 1080p CCTV to be used at home.
Potentially only 2 cameras needed.
Aye, that is correct
Will be ok just cutting with a junior hacksaw mate, I'm a plumber and fitted loads.
I have a brick out house just outside my house and I have now added a door on one side and bricked up the other Side so it is actually attached to...
Tried it again tonight and after awhile all 6 lights start to flash, Is this some sort of fault code.? Thank in advance
The above tumble dryer has stopped heating up. been looking at posts and they all point to stats or heating element, however I have checked the 2...
Hi, the paddle has snapped on the above washing machine.
I have figured out how to get to one of the securing screws by taking off the black...
Ive been on a worcester training course and apparently the stepper motor is the same motor fitted in some bmw wing mirrors.
Any ideas anyone, im supposed to be starting this project next weekend
Hi guys, I am building a new pond, this will be above the ground about 6 concrete blocks high by 2.4m x 2.4m.
I am wanting to render the outside...
No, no need to turn the electric off at all.
They can be a bid fiddly to get off and back on again.
These cables are just Earth bonding cables.
Thats just an earth wire and the silver thing is just a clamp.
Undo the screw on he front and unwrap from around the pipe.
Replace the pipework...
Just change the DHW thermistor, nothing todo with the pcb. I have changed quite a few thermistors and never changed a PCB due to H3 fault.
Separate names with a comma.