what would be the best solution for outside wallwash lights going through a 2ft thick granite wall for termination .
how about £250
thats what a plumber wanted to charge me
how much should it cost to change over a kitchen sink , basically new for old no alterations to pipework etc
wired up gloworm boiler there are 2 valves heating and hw.the t/clock when it calls 4 hw the boiler fires up valve opens but after about 45secs...
so what would be his day rate?
what you on about ban all sheds?
how much would a tiler charge for taking old grout of tiles and re grouting per hour or sq metre? :?
has anyone installed trace heating for gutters any info would be good .eg how to terminate the cable at stat and what you do with the end of the cable
so would that be a regulation
what are the regs on single electric oven which is built in to units connected to a 13amp fused spur behind it with no other means of isolation...
it now goes stone cold every 45seconds
i have a combi boiler when i have a shower now the water fluctuates between hot and cold the shower is a mixer one it used to go cold if the hot...
a 6kw water heater what sizeof cable should my sparky use 10m run approx
thanks 333rocky333 most helpfull .didnt realize i was going to open such a can of worms with a simple question !!!! :!:
so basically no one has a solution to the problem
can anyone suggest one for a 1300w heater outside a pub for smokers i have fitted 2 and both have stopped working they were suitable for 1400 w
has anyone wired a polypipe single zone master (pb1zm) there is a programable room stat with it on the diagram it says a volt free contact boiler...
how many connections do i need from a viestman boiler to the underfloor connection unit ?
i am just lack of confidence
a 2.5 swa would be ok
Separate names with a comma.