Search results

  1. T

    Heating not firing, hot water ok

    We did have a 20 mins power cut yesterday and the Mrs thinks that the heating was working after that but never managed to reach its 18 deg c desired temperature. Possibly relevant.
  2. T

    Heating not firing, hot water ok

    Nope turning here on and off did not help. Still working fine for water, but no heat.
  3. T

    Heating not firing, hot water ok

    Hi, I have a Worcester Bosch 40cdi conventional boiler. Controlled via Hive. During the recent big freeze the boiler has been working fine with both heating and hot water working fine. Now that the big thaw is occurring I find that my boiler won't fire for heating! The boilers core...
  4. T

    Can't get it up - My Door Handle

    It also has end caps on all three hinges hidding large allen key holes top and bottom And adjusting the bottom ones raises the door! Yay! Now how to work out how to get rid of the drafts at the bottom of the door!
  5. T

    Can't get it up - My Door Handle

    Note, the allen key holes are 2 to 3 mm. So very small!
  6. T

    Can't get it up - My Door Handle

    The gaps around the doors are somewhat uneven. The gap above the door on the left hand side is 3.5mm, on the right hand side it is 3.4mm. The gap on the left hand side of the door is 3.8mm at the top and 4.9mm at the bottom. The gap on the right hand said of the door is 4.4mm at the top and...
  7. T

    Boiler Sump Question

    Thanks. I am in Devizes. City Plumbing was one of the two companies that I tried, but they both failed to call back.
  8. T

    Can't get it up - My Door Handle

    Thanks for the response! The handle has no issues at all going up with the door open. It is smooth as a baby's butt! The door has a latch and a hook in the centre of the door and a hook towards the top and a hook towards the bottom of the door. Either side of the hooks at the top and bottom...
  9. T

    Boiler Sump Question

    Thanks for the info, re the problems that could occur if I did not get it done. Any chance you could share where you would source the part from? Ta
  10. T

    Boiler Sump Question

    Hi, The parts seems to be the plastic assembly that sits at the bottom of the heat exchanger. The Engineer refereed to it as a sump. The boilers GC number is 41-311-72 if it helps. I'll give that ebay store an email. Thanks
  11. T

    Can't get it up - My Door Handle

    Hi, My front to has been acting up for a while and is progressively worsening. The door is a composite door (not sure how old) which has a 5 point locking latch. Essentially the door has got to a point where it takes a lot of force in a jerking motion to get the handle to go up far enough to...
  12. T

    Boiler Sump Question

    Hi again. Well I have called three parts suppliers and asked them if the sump can be provided in isolation. None of them have bothered to respond, so I presume the answer remains that you have to buy the whole heat exchanger! D’oh. So given the cost of doing that I am now wondering if the...
  13. T

    Boiler Sump Question

    Not sure how old the boiler is and not sure if we have any associated paperwork -- I moved to the house 2 years ago, so would have to check what was left behind. The Engineer said that the sump was damaged due to a previous small fire in the boiler -- which has caused the plastic of the sump to...
  14. T

    Boiler Sump Question

    Thanks for the thoughts. Would these be available only? My rudimentary googling skills have failed me! Thanks
  15. T

    Boiler Sump Question

    Greetings! I have a Worcester Bosch 40 Cdi Conventional boiler. Recently it started leaking. The plumbing engineer that visited diagnosed a damaged sump, with the water escaping from a hole/crack in the sump as opposed to moving along its normal channel. The engineer went off to investigate...
  16. T

    PTZ - "Grey" Screen of Death?

    Thanks for the tips. After a lot of searching I finally found the default settings. A baud rate of 2400b was required. It now works! YAY!!
  17. T

    PTZ - "Grey" Screen of Death?

    Hi, it is connected old school with 4 connections... 12V power, BNC video and +v / -ve wire for PTZ control. I have checked that the PTZ +ve and -ve wires are the correct way around. The PTZ is set as camera #1 on my 8-channel DVR and the configuration is currently set as Pelco D with a baud...
  18. T

    PTZ - "Grey" Screen of Death?

    I finally ended up with the ANNKE 720P High-speed Mini-dome CCTV Security Camera (3X Zoom, Outdoor, Night Vision) https://www.amazon.co.uk/gp/product/B00VV91AZS/ref=ask_ql_qh_dp_hza And I installed it yesterday. The camera works ok, the picture is not amazingly, but I was not expecting...
  19. T

    PTZ - "Grey" Screen of Death?

    Thanks for the info. Sadly however i need a camera that has a BNC connector to fit my existing wiring set up. So that Floureon probably is a non starter for me.
  20. T

    PTZ - "Grey" Screen of Death?

    What would people choose from out of: 1) ANNKE 720P High-speed Mini-dome CCTV Security Camera (3X Zoom, Outdoor, Night Vision) https://www.amazon.co.uk/gp/product/B00VV91AZS/ref=ask_ql_qh_dp_hza 2) SUNBA 3X Optical Zoom, 960H Mini Analog PTZ Camera, 98ft Night Vision Pelco D Outdoor Security...
Top