Check that your pipework is supported proparly
Im going to be fitting new for old. the only thing is the existing system has gravity primary's. I am going to fit 2 zone valve's but i am looking...
On the twin channel programmer for this boiler. Does the hot water setting just preheat the water in the boiler when it is on
It drips at any pressure. I filled it to 1 bar and it drips
This boiler keeps losing pressure. on inspection i noticed the blow off is dripping constantly. At first i tried to check the expansion vessel,...
can new heat only boilers still be fitted to a system with gravity primarys. Does it need to be a floor standing boiler?
Is it still o.k to fit a SE combi where there is no possible place to take a condensate pipe
use a mcalpine fitting or heat a bit of 32mm pipe and ease it over the other pipe to form a socket then glue it together with solvent cement
Do you need to powerflush or can you use tubs of cleanser
Just new to domestic heating. I served my time on commercial sites on the serious stuff and just looking for some tips.
Can someone tell me a good procedure for cleaning and flushing a central heating system before changing a boiler
I was looking for a boiler to replace and old one. The system will still have a hw cylinder. In a brochure i have there are system boilers and...
I recently had this problem, the drain valve on the cylinder was broken. I disconnected the top connection and siphoned out as much as i could...
What is the best way to drain a heating system with no draining point.
what do you mean by boiler interlock
Thanks guys. I think this has been a good topic
If you know where the pump is the zone valves are usually near it. If you dont know where the pump is try to listen for it, it could be under the...
Are hep inserts for compression fittings only or should they always be used
Is it now a reg to fit a room stat with combi boilers
I work for a company who fit and recommend Worcester. I usually fit the Greenstar CDi models. Just wondering what everyone else fits or rates the...
Separate names with a comma.