not thought of that. The tarred hard stand is next doors parking space. They can only park on that spot. The area I'm working belongs to my house....
I want to make the front of my house more appealing.
Attached are 2 photos of the front of my elevated house.
In the photos you can see where I've...
Just fitted cold tap valve from screwfix.
Screwed in well although bottom rubber seal washer is smaller than one removed. No leaks Thank you guys
Ok Terry so its the link Madrab gave? Screwfix
[ATTACH] I've measured the thread of the valve. It's 2cm (3/4").
Hence why I'm confused by for the 'bath'
This photo is of cartridge I removed. 3/4" thread.
So link you sent from screwfix is what is in this photo? If so it will save me...
Yes they're screw. I'll take a photo later. Thanks for your help
They have cartridges built in? Seals etc?
Water isn't leaking from base of tap.
It's coming from the cold cartridge. Trickling down the side when tap turned on then forming...
I turn on the cold tap. You can see it oozing water from the base.
I'll check later..... thanks
I mop up water around base and then turn on water. You can see it leaking from base. Really bizarre.
Watch this space...I'll be back just in case I get stuck
I'll examine the bloc to see if their is a fracture.
I think my set up has copper pipe tails.
Just got to get right size. Screwfix selling monobloc for 39.99
I guess so
Tap was fitted 12 years ago with new kitchen.
I'll get a tap spanner and remove it all. Let's see what's going on underneath the tap body.
I didn't think water could leak between body and sink...
Seems really difficult to get at underside of tap. I guess you need specialist tools?
I had a drip from my Deluxe chrome monobloc tap.
I fixed it by removing the cold tap side and replacing washer.
Now water is leaking...
Separate names with a comma.