How did you know i got a motorhome???
The repairs were done in January new plate exchanger & diverter valve actuator & body, the bloke who's done...
LOL PMSL etc.....edited
Well after recently repaired boiler i woke up this morning to freezing cold house.
Found that the mains 3A fuse blown replaced the fuse & noticed...
If the hot tap is operated the boiler continues to fire even when the tap is turned off the closest rad is getting hot.
Do you do Basildon per chance ;)
I hear you.....but for me it's been ok
Thanks for the heads-up i'll do some research :)
The boilers in good condition not regularly serviced though.
The boiler senses the hot water tap is open boiler fires as normal but there is no hot water, does that mean the flow switch is ok?
Thanks for the replies chaps, so a fix it is then....anyone know a good heating plumber nr Basildon ;)
This boiler was installed in 2005 & has been for the most part pretty reliable.
The boiler has now stopped supplying hot water & a local boiler...
Guess Not :shock:
Is there a Baxi specialist here that could find my problem? I'm in Basildon Essex....... :?:
I've still got the old mechanical timer could i not try this first?
If it turns out to be the Intellistat can you recommend a replacement?
The intellistat has been fine up til now so i know it's connected ok, as for programming, i've reset the Intellistat using the little pin-hole...
Thanks again Tony,
The boiler again is ignoring the Intellistst, do you think it could be the PCB?
All condensate pipes were clear.
The condensate vessel is divided into 2, 1 side connected to the combustion chamber this fills & spills over...
I don't know WTF is going on, everything seems to have sorted itself Intellistat now showing correct desired temp, boiler is firing as it should....
Hi Tony thanks for the reply,
I switched on the boiler yesyterday & it fired & is working of sorts.
It seems to be ignoring the Baxi...
Separate names with a comma.