do you think my brother needs to get this looks at, would you recommend a different way of doing this, also is the 10mm cable from the internal...
Looking for clarification,
my Brother has just moved house, in the garage he has 2 consumer units, one for the house and would appear one...
Guys just reading some of these post trying to find out if i need larger than 22mm gas supply to my new boiler, apart from a few feet of pipe
Many thanks :lol:
anyone have a comment ref this question
any advise welcome
can you lay a screed directly on to the thermal sheets (ecotherm)
i am in the process of laying the floor in my extension,
its an L shaped floor...
what the max thickness for screed!
can you lay directly on top of the thermal sheets
i have just had a concrete floor layed, how long will i need to leave this
before i can lay the Kingspan thermal sheets and the top screed,...
someone on here guided me to the site, www.sensor.co.uk,
the guy at this company is very helpful, i purchased 4 controllers units and 5...
my understanding is that the heated mirror pad only comes on when the
LED's are switched on via the PIR, but will call Roper Rhodes...
its an selv ip44 rated zone 2&3, instructions are pretty naff, 2.5 watts
i have a separate lighting circuit from the CU for...
just read my post back, i have not explained this very well,
its a mirror with LED's down each side, with an heated pad behind the...
i was told by the manufacturer that as long you use the correct cement based adhesive you can DOT N DAB the aquapanel,
i have just purchased a Bathroom mirror heated with led's and pir,
do i take a spur off the socket ring or the lighting!!!!!
thanks for the advise,
will the mains pressure be enough to flush out any excess flux that may be in the inner pipe or is there a...
i have just run approx 80 meters of copper pipe (New extension)
2 bathrooms (both have a separate bath and walk in shower) downstairs WC...
here we go again, listen here dad, i am not an electrician, the sam as you are not a pilot,
however there is nothing wrong in being...
Separate names with a comma.