Are these bypass valves? there’s a small nut which unscrews which gives more access to the spindle
[ATTACH] hi guys & gals
Im currently doing a bathroom refit and have noticed the stud wall is just 18mm x 47mm vertical pieces of osb(i think) i...
my bathroom is tiled in the shower cubicle and above basin the rest is painted plasterboard (dot and dab and stud walls)
is it best to overboard...
Efl i dont know which is more dangerous
the fact that its incorrectly labelled or the fact that if the socket breaker is off 4 live sockets still...
well thats rubbish
1 room split between two breakers not labled correctly
kitchen breaker isolates kitchen and 4 lounge sockets
just had a rewire to bungalow
Lounge has 6 sockets
4 of the 6 sockets are on the kitchen breaker at consumer unit
At consumer unit there is two...
Im not sure if my existing light switch wiring is correct there are two cables to the switch i am assuming one is from consumer unit the...
The mortar/concrete to the bottom of my house has cracked and come away in places, i have removed the problem areas but ensure on which...
EFL you say non is really required
dont you think it would be better to isolate with remote switch for maintenance purposes/faults?
thanks for your reply eric
i was just unsure wheather to use a 3 pole fan isolated being 10amp or 3 amp fcu or both
i.e if a problem occured...
I am changing my existing non timed extractor to a timed extractor
xpelair vx100t 12w/230v=0.05 amps
should i include a a...
There's no flies on you lot!
Checked wiring in socket all wires were secure
Checked with Socket Checker and no earth
thanks for the reply's i get 000.4 ohms
yes i have multimeter autorange
what do i do
my neon screwdriver lights up on all conductive parts on dishwasher should this happen? or is it faulty
[ATTACH] [ATTACH] How would I test this to see if good or bad
Separate names with a comma.