Sounds like its knackered, there are issues with these units. Turn the power off, remove the cover from the sender unit and you will see wires...
Look on showerdoc website and post the pic for a free identification and part number
Almost any shower hose will fit. You will get one from your local plumbers merchants or DIY store. The size is 1/2 inch BSPT and you will need to...
The pressure when the system is stone cold should be just above 1 bar. As the system heats up the pressure will rise as the water expands. 2 bars...
Have you checked for a leak yourself? Close the stop cock and see if the disc in the centre of the water meter still spins. I replaced a main...
My misunderstanding, I thought you said they WERE quarter turn taps :oops: If they are similar to the the taps in the photo a standard 1/2" tap...
Sounds like an air lock to me. Use a wet/dry vacuum on one of the cold taps with the others closed. There are other methods but I have found...
At least 50 different typs available. Take the insert and the tap head with you to a good plumbers merchants.
The make and model of the boiler that you have has a lot of relevance. The manufacturer will state the ventilation requirements. Having 3 vents...
What boiler is it and do you have a hot water cylinder?
s.briers@ntlworld.com please send me the power point. Thanks Kirk
You could wire the ch on in the existing programmer to the live terminal. This will leave the ch permanantly on and then allow control on the new...
Yes thats right. You will leave the hot water on timed and the heating on constant on the existing programmer
Why don't you fit a wireless progammable roomstat and solve both problems? Take a look at the Honeywell RF programmable room stat. Steve
Did you vent the pump when you filled up?
He means does it run on natural gas (Do you have a gas meter) or Liquified propane gas (Do you have a large gas storage tank in the garden that...
Try running it without the shower hose attached, it might be collapsing when hot and after it has cooled it works again. Simple I know but worth a...
The answer is to cap off the pipe that the fan was attatched to and refit the fan elsewhere.
Hi Place the basin and pedistal in position and draw round the bottom of the pedistal. Once removed, you can drill the holes through the floor...
Shut off the power supply to the boiler and isolate all the valves under the boiler overnight. If the pressure drops by the morning, you have...
Separate names with a comma.
