He was told about it. But after remeasuring with lase level, the floor is out 18mm, not 30! Be alot easier to take this out. I could lose a...
Copper would always be the first priority however I know full houses plumbed in Plastic in for heating and other well over 20 years and never a...
Not where I am. 10 week delay in getting these doors and windows! I'll ring them tomorrow see what they can do but I can't see them fixing this...
It's not the height I'm looking to make up. The door threshold is 30mm below what it should be. The double door was made to big by 30mm and if I...
150mm . It's the finished floor level coming from existing house to the furthest away location of the new extension which has a double door is...
Been building an extension these last few months in different stages. Foundations where out 25mm over an 8.5m length which isn't much. The block...
Yes I understand this. I did forget to mention the distance I have is 2.4m, insulation is 150mm with 75min of screed. That's 225mm height to...
I think I will have the fall and do away with the saniflow. Is it possible to run the 4inch pipe from this small box room, along the floor in...
As the title says, I have 3 questions. The first is to refresh my memory about the 90d bend for the toilet waste. For it coming up through the...
Yes
Where I am the regs are different. Soldering is allowed under floors.
There's already one shower in the house fed of the hot water which is heated by oil or a multi fuel stove.
Probably a Mira tank fed shower 9kw. Yes, vented system oil system.
I am building a new extension for my parents to live with us to be close to us now that they are in there late 70s. The new extension will need a...
Was worried incase the plastic shims compressed under loading and went with slates in the end. Maybe a bit over thinking on my behalf about the...
For my bottom deck I have 8x4 sheets of 18mm OSB for installing on my 150mm insulated warm roof onto 9x2 joists spaced 400mm apart. When...
For a flat warm roof on an extension with a parapet all around, my block later is out by 30mm on one corner of the building and 10mm on the other...
What size and type nails for the timber to timber joist hangers. I picked up some strong hex screws in a hurry when purchasing the materials but...
Separate names with a comma.
