Search results

  1. W

    Built new shed with shiplap

    Would a Creocote used on new shiplap be better than using say a cuprinol ducksback paint?
  2. W

    Graphics cards

    I have built a new pc, using an MSI MPG Z390 GAMING EDGE AC motherboard. I want to add a graphics card with 3 monitor support used mainly for videos not gaming. Looking at "MSI Radeon RX 570 ARMOR 8GB OC GDDR5 Graphics Card" Just wondering if anyone else had experience in graphics card and...
  3. W

    Building new PC

    I managed to transfer the license key ok, used a bootable usb stick reinstalled windows 10 pro on new ssd and then reactivated software
  4. W

    Building new PC

    Thanks, may just install a fresh copy of windows, i did however believe you could transfer the licence??
  5. W

    Building new PC

    I have windows 10 pro running on a 1Gb SSD in my current pc. Can i transfer that HDD to my new PC then transfer the windows licence?
  6. W

    Mercedes c200 2017 dash light

    Oh think i found it, start stop deactivated
  7. W

    Mercedes c200 2017 dash light

    I have a symbol on top right corner with an A in a circle and a diagonal line through it, any ideas what that might be?
  8. W

    Texecom Premier Elite

    No, that door gets the least amount of use.
  9. W

    Texecom Premier Elite

    Had a new battery within last 12 mths, normally I have received a low battery but not this time.
  10. W

    Texecom Premier Elite

    Just replaced with new battery, now ok. Thank you Why does ricochet monitor not show battery as low?
  11. W

    Texecom Premier Elite

    Removed battery, replaced contact flashing red now i see it as a tamper fault
  12. W

    Texecom Premier Elite

    I have a ricochet door contact that says in Supervision Fault, how do i reset this after solving the issue i had (Loose sensor not making contact) ? Will I have to put the control panel into a "Commission Mode" and set up every contact sensor again or maybe in wintex just delete the zone #10 (...
  13. W

    HIKVision NVR

    I have a 4 channel NVR, that has suddenly stopped receiving video to IVMS4200. Having looked further i see that the NVR is working if i attach a monitor direct, but appears the ethernet port going in stays red, can't ping the IP address either. Tried another cable but same. Anything else to try...
  14. W

    smartcom

    It was far left LED flashing. middle is wifi, right is power
  15. W

    smartcom

    I think the cloud server was down works fine now.
  16. W

    smartcom

    Bought a new phone, generated new app activation code entered this, then asks for user code (one i type into keypad) but won't connect. Any ideas please? message says can't log in can't access smartcom? Noticed far left LED flashing, is that the cloud server down? My wifi light is solid green on...
  17. W

    Texecom premiere wireless alarm

    The only thing wired is the keypad, everything else is wireless, apart from the smartcom. so looking at options 8 and 9 in areas options.
  18. W

    Texecom premiere wireless alarm

    Just looking on wintex, how would i set an area to only use internal siren, are they available for the elite? de select option 9 bell and strobe output for the new area?
  19. W

    Texecom premiere wireless alarm

    what something like the Premier External TD-W or GJD D-Tect R Detectors, the only problem may be someone coming in who has no intention of breaking into van, cats, dogs, etc. Could one be on a zone then that zone only triggers an internal sounder, so wakes me up but not the neighbours? could put...
  20. W

    Texecom premiere wireless alarm

    In the drive. Apparently it is something they are looking into. So one day, just not today.
Top